or make 4 interest-free payments of $12.43 AUD fortnightly with More info
RAM Combination Brake/Clutch Reservoir U-Bolt Mount with Short Double Socket Arm and Base Adapter for the TomTom Rider 400 450 & 550
The RAM-B-174-202 consists of a mounting kit that can be fitted to both brake/clutch reservoirs and rails that are 12.5mm to 31.8mm (0.5" to 1.25") in diameter, short double socket arm and a 63mm round AMPS base adapter. This kit is the OEM version of the RAM Mount kit supplied with the TomTom Rider 400 450 and 550 GPS navigators.
This kit can also be used with any RAM Mount cradle that requires the round base adapter or any device that has the AMPS 4-hole pattern.
The round base adapter connects to the back of the factory cradle that is included with the purchase of the TomTom Rider 400 450 & 550.
The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
Compatible with the following TomTom motorcycle GPS devices –
• Rider 400
• Rider 450
• Rider 550
The RAM-B-174-202 can mount to both the brake/clutch reservoir or any round rail that is 12.5mm to 38.1mm (0.5" to 1.25") in diameter.
To see if the RAM-B-174-202 base will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centres have a minimum width of 24mm (0.94") and a maximum of 40mm (1.58").
This kit does not come with the metric bolts to suit the TomTom motorcycle cradle and they will need to purchased separately.
Powder Coated Marine Grade Aluminium
1" Rubber Ball "B" Size
Brake/Clutch Reservoir Base Installation Manual