RAM Mount OEM Garmin Motorcycle GPS Mounting Kit


or make 4 interest-free payments of $12.25 AUD fortnightly with Afterpay More info

RAM Combination Brake Clutch Reservoir/Handlebar Mount with Short Double Socket Arm for the Garmin zumo

This is the OEM version of the RAM Mount hardware that ships with the Garmin zumo range of motorcycle GPS navigators. It is a direct replacement for the genuine Garmin supplied kit and is suitable for use with the genuine Garmin accessory cradles for the Montana, Monterra and inReach series devices.

The RAM combination handlebar and brake/clutch reservoir mount provides the ultimate flexibility for mounting to your motorcycle. This product can mount to both the brake/clutch reservoir or any round rail that is 12.5mm to 31.8mm (0.5" to 1.25") in diameter.

Mount to either your handlebar or brake/clutch, almost infinite adjustment and perfect viewing angles are provided in this kit. The patented RAM Mounts design also dampens shock and vibration helping to extend the life of your mobile device.

Compatible with the genuine Garmin motorcycle GPS cradles provided with the following -
• zumo 220
• zumo 340
• zumo 350
• zumo 390
• zumo 395
• zumo 396 LMT-S
• zumo 550
• zumo 590
• zumo 595
• zumo 660
• zumo 665

Also compatible with the following genuine Garmin accessory cradles –
• Garmin Montana/Monterra AMPS cradle available here
• Garmin inReach AMPS cradle available here

The RAM-B-178U-A can mount to both the brake/clutch reservoir or any round rail that is 12.5mm to 38.1mm (0.5" to 1.25") in diameter.

To see if the RAM-B-178U-A base will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centres have a minimum width of 24mm (0.94") and a maximum of 40mm (1.58").

Powder Coated Marine Grade Aluminium

Ball Size:
1" Rubber Ball "B" Size

Brake/Clutch Reservoir Base Installation Manual

Shipping Cost:
Calculated at Checkout
310.00 Grams
17.00 (cm)
5.50 (cm)
8.00 (cm)