Loading... Please wait...
  • Image 1

RAM Mount Composite Handlebar Swivel Base for Cradles

$10.38

or make 4 interest-free payments of fortnightly with Afterpay more info>

SKU:
RAP-274U
Brand:
Weight:
40.00 Grams
Shipping:
Calculated at checkout
Quantity:

Product Description

RAM Composite Handlebar Swivel Base

The RAM high strength composite rail mount consists of a locking tooth system with a standard diamond plate end. The mount will accommodate rails up to 1" in diameter. The hole pattern found on the diamond base adapter will connect to most RAM cradles.

 

Installation Instructions:
To mount to a circular rail, simple press the plastic "U" clamp around the rail and then connect and tighten the small nut and bolt to close the U clamp.

Next connect the diamond plate to the mounted clamp at the required angle and screw in the other bolt through the diamond plate. Now you are ready to connect any of the RAM composite or any other cradle with two holes positioned 1.912" center to center.

Placing a rubber lining (not included) between the tube and the mount for a tube with a diameter less than 1" will help the base grab the rail.

 

Material: 
High Strength Composite

Ball Size: 
1" Rubber Ball "B" Size 

Product Videos

RAM Composite Handlebar Swivel Base (01:16)
Product ID: RAP-274U http://www.rammount.com/Default.aspx?TabId=63&partid=082065080045050055052085
  • RAM Composite Handlebar Swivel Base
    Product ID: RAP-274U http://www.rammount.com/Default.aspx?TabI...

Warranty Information

All RAM products and parts come with Lifetime Warranty against defects in materials and workmanship for the life of the product or part.

The Lifetime Warranty covers the mount or its components only. The mounted device is not covered under the Lifetime Warranty and will not be replaced if damaged as a result of mount failure.

This warranty is expressly limited to the persons in the United States, and all foreign countries who purchase RAM for resale or use in the ordinary course of the buyer's business. This warranty does not cover any product or part that has been abused, worn out, heated, ground or otherwise altered, used for a purpose other than that for which it was intended, or used in a manner inconsistent with any instructions regarding its use.

In the unlikely situation that a RAM Mounts product fails due to a manufacturing defect, please contact us on info@motogps.com.au to arrange the approved return of the item at your cost. We will evaluate the issue and either -

1. Repair the item and ship it back to you at our cost
2. Replace the item with an equivalent product and ship it back to you at our cost

All approved warranty claims must be sent to the following address -

MOTOGPS Warranty Claim
PO Box 206
South Hurstville
NSW 2221
Australia

Please include a copy of your original invoice and your name and address details with the claim.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure

Find Similar Products by Category




Sign up to our newsletter


Connect with us: Facebook Twitter Pinterest YouTube