or make 4 interest-free payments of $15.95 AUD fortnightly with More info
The RAM-B-174-GA12 consists of a hardware for mounting to both brake/clutch reservoirs and rails that are 12.5mm to 31.8mm (0.5" to 1.25") in diameter, double socket arm and a Garmin GPS cradle.
The mounting hardware for brake/clutch reservoirs includes both standard and metric mounting bolts.
The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
The included high strength composite, form fitting cradle offers full access to the device’s ports and is designed to hold and protect the device in high vibration environments.
Compatible with the following devices:
• Garmin Astro 220
• Garmin GPS 60
• Garmin GPSMAP 60
• Garmin GPSMAP 60C
• Garmin GPSMAP 60CS
• Garmin GPSMAP 60CSx
• Garmin GPSMAP 60Cx
1. Open access to all electronic ports
2. High strength materials ensure product longevity
3. Full access to all ports
4. Lifetime warranty
5. Made in the U.S.A.
The RAM-B-174-GA12 can mount to both the brake/clutch reservoir or any round rail that is 12.5mm to 38.1mm (0.5" to 1.25") in diameter.
To see if the RAM-B-174-GA12 will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centres have a minimum width of 24mm (0.94") and a maximum of 40mm (1.58").
Powder Coated Marine Grade Aluminium & High Strength Composite
1" Rubber Ball "B" Size